1x MSD 'ProBillet' Distributor to suit late model (XD on) Clevo engine, or any other engine that requires the smaller 12.5mm spindle.
It is used but in good condition throughout and has been removed from a running engine. Included is the main distributor body including cap and rotor, the vacuum diaphragm and wiring harness. It will run as soon as you connect it up to a coil (red to coil positive, orange to coil negative, black to chassis ground, grey is tach feed) and set the timing.
The picture below is of this distributor fitted to a 351 Cleveland.
NSW, Broken Hill
upload_-1WUBOJ3ON.jpg 175.19KB 1 downloads